MAJIC 104 -There is a pill for that

| Preparation and use of the MAJIC Pill |

 

Introduction:

The MAJIC Pill is an excellent option for those interested in ingesting processed plant material. We are continuing our tradition of high quality products and these 2 piece fillable capsules are superior in every way to the standard commercially available capsule. They are not derived from animal byproducts like most gelatin based products. Our capsules are plant based so that your product remains as natural as possible. They come loosely assembled so all you need to do is separate and fill. Once full, reassemble and gently push together until you feel a light click. Their design features interlocking contours that will hold the assembly firmly together after filling.

 

Content preparation:

You can fill your MAJIC Pills with any finely ground plant or flower material as well as separated components such as kief. If you are using the MAJIC pill for cannabis, you must first decarboxylate your material. This will convert and activate all of the compounds to their desirable form for greater potency. When smoking this is achieved through the burning process. For ingestion you must follow these simple steps for maximum enjoyment.

 

Items needed:

  • A baking sheet
  • Parchment paper
  • Finely ground leaf, trim, flower or other plant matter

 

Step 1 -

Preheat your oven to 220°F / 105°C. While it is warming up, prepare your plant material. Line a baking sheet with parchment paper and spread you material into a thin layer on the parchment. Make sure all material is finely ground so all residual moisture can easily escape.

 

Step 2 -

The time it takes to completely decarb your material is dependent on age and moisture content. Bake your older or very dry material for 20-25 minutes. Fresher material with a higher moisture content may take up to 45-50 minutes. Check after 20 minutes and if necessary bake longer until fully dry. If the material feels dry and powders easily between your fingers it is likely done.

 

Step 3 -

Allow the material to cool and if desired or needed break up any larger pieces into finer particles. Any plant material should grind to a fine consistency at this point.

 

Step 4 -

Take a small square of paper (approx. 3"x 3") and put a light crease in the middle. Use this paper to portion out how much material you would like to add to your capsule. This can be done by visual estimation or accurately and repetitively using a digital scale. Then lightly bend the paper so that you use the crease to direct the material into the capsule.

Hint: If estimating, fill one, then dump it back on the paper and draw a circle to represent the needed volume.

 

Step 5 - Reassemble the capsule and using light pressure, press both ends together until you feel it lock into place. Now you have a portable, discreet and easy to swallow capsule. 

 

Now that you're done...

We hope you enjoy the MAJIC Pill. At first we suggest you make a small number and adjust your fill volume if needed. Once you have determined your optimal fill, make as little or as many as you wish. You can make a whole bottle and store them in the factory container or make a small amount and store them in another. The shelf life is approximately 12 months from time of assembly but keep in mind that capsules are moisture sensitive and should be stored in an airtight and watertight container for best results.